Environmental Monitoring Equipment
We offers a wide range of monitoring equipment to measure levels of pollutants in stack emissions, air and water, providing the customer a plethora of options to choose from.
Continuous Emission Monitoring System
The Uniphos CEMS is robust, well-engineered and a reliable solution for continuous measurement and monitoring of various toxic gases in industrial boiler and process stacks. It is an Online Analyzer with inbuilt diagnostics and capable of Auto/Remote calibration. Our wide range of emission monitoring analyzers provide a complete solution for stack monitoring and ensures a safe and clean environment.
Uniphos CEMS are available based on different technologies depending upon the suitability and user’s requirement:
- Highly sensitive & gas specific Chemiluminescence / Fluorescence based NOx and SO2 Gas Analyzers
- Non-Dispersive Infrared (NDIR) based Analyzers
- TDLAS based Analyzers
- UV-DOAS based Analyzers
Analyzers
NDIR Gas Analyzer
NDIR gas analyzer is designed for continuous monitoring of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks.
TDLAS Gas Analyzer
Uniphos TDLAS based gas analyzer is a highly accurate analyzer used for the monitoring of atmospheric pollutants like HF, HCl, NH3,etc.
Uniphos Oxygen Analyzer
Uniphos Oxygen analyzer is an advanced analyzer equipped with a robust Zirconia Oxygen sensor for the monitoring of Oxygen in furnaces, incinerators, etc.
Dust Analyzer
Uniphos Dust analyzer uses dynamic detection principle to measure dust or particulate matter concentration suspended in the exhaust gas passing through a duct, stack, etc.
Sample Handling System
Peltier Based Sample Handling System
Uniphos Peltier based sample handling system is a stack mountable sample handling system with a unique heat exchanger design which eliminates the necessity of heated sampling lines.
Membrane Based Sample Handling System
Uniphos membrane-based sample handling system is tailor made for dry sample extraction of corrosive gas samples.
Simple Sampling Probe
Uniphos simple probe is a compact and stack mountable probe for sample extraction.
TPF Probe
TPF Probe
Uniphos Temperature, Pressure and Flow (TPF) measurement is an easy to use, reliable probe designed to provide rapid and accurate measurement of temperature, pressure, and flow of gases in industrial stacks.
CEMS Accessories
Data Acquisition System
The Uniphos CEMS data acquisition system acquires, stores, and allows the customer to access data remotely.
Remote Calibration
Remote Calibration System allows the user to perform validation and calibration of the analyzer remotely.
Ambient Air Quality Monitoring Systems
Effluent Quality Monitoring Systems
Uniphos Online COD Analyzer (Absorption Method)
The Uniphos Online COD Analyzer operates on the non-dispersive absorption principle to determine the Chemical Oxygen
Demand in waste / effluent
water samples.
Uniphos Online COD Analyzer (Potentiometric Method)
The Uniphos Online COD Analyzer is a micro controller based online analyzer to easily determine the Chemical Oxygen Demand
in waste / effluent
water samples.
Uniphos Online Total Cyanide Analyzer
The Uniphos Online Total Cyanide Analyzer is a fully automated online analyzer designed for the continuous measurement of Total Cyanide in waste/ industrial water samples.
Uniphos Online Ammoniacal Nitrogen Analyzer
The Uniphos Online Ammoniacal Nitrogen Analyzer is a reliable, accurate online analyzer designed for the continuous measurement of Ammoniacal Nitrogen in process/ surface water samples.
Uniphos TSS probe with Controller
Uniphos TSS probe with controller provides a quick, accurate, low-cost solution for real time Total Suspended Solid (TSS) monitoring in industrial wastewater, municipal water or ground water.
UV-VIS COD-TSS Probe with Controller
The UNIPHOS online UV-Visible COD/BOD/TSS analyser is an advanced multi-parameter water quality monitoring system for measurement of chemical oxygen demand (COD), biological oxygen demand (BOD) and total suspended solids (TSS).
Portable COD Analyzer with Digester
This rugged and portable COD analyzer enables one to easily determine the Chemical Oxygen Demand in waste / effluent water samples.
Boreal Laser Gas Detector
GasFinder Instruments and Measurement Heads use a Laser Based Gas Detection principle called Tunable Diode Laser Absorption Spectroscopy (TDLAS) to Analyze, Monitor, Measure, and Detect gaseous molecules of a specific target gas for different applications.
This particular technology is ideal for detecting a number of different Toxic, Combustible, Hazardous, and Greenhouse Gases.
Laser based products are widely adopted in industrial applications primarily for its Quantitative Performance in Difficult Applications, Fail-Safe Design, and Maintenance Friendly Operation.
Boreal Gasfinder3-MC
Gasfinder3-MC is an All-in-one field mountable multi-channel analyzer which can detect 2 different target gases for fast leak detection and ambient monitoring.
Stack/Duct Probe
Stack/ Duct Probes are ideal for challenging stack monitoring applications for monitoring path lengths from 0.5m to 20m.
OPX Head (Open Path Transceiver)
The OPX head is a laser based open path gas detection system ideal for line-of-sight gas detection.